Data Center & Chip Fab Construction Security

How to Secure a Data Center or Chip Fab Construction Site in Texas

Data center and chip fab (semiconductor fab) construction sites in Texas are best secured with solar surveillance trailers that use AI detection and 24/7 human-verified monitoring, placed at gates, laydown yards, and perimeter lines, plus cellular amplification and temporary internet so crews and site trailers stay connected before permanent utilities are in. Core Solutions, based in San Antonio, configures, deploys, and supports that setup for general contractors in Austin, Taylor, Abilene, Dallas-Fort Worth, Houston, San Antonio, and throughout the state.

Get a Custom QuoteCall Us Direct

Quick answer

Solar-powered trailersNo trenching, no temporary power, no fuel to haul

Detect

AI-enabled detectionPeople, vehicles, perimeter breaches, and license plates

Respond

24/7 human-verified monitoringLive voice warnings and escalation to your site contacts or police (add-on, quoted per site)

Connect

Cell signal & site internetCellular amplification and temporary business internet and wide-area Wi-Fi for site trailers and work areas

Deploy

Fast, flexible termsMonth-to-month rentals, typically deployed in 24-36 hours of approval

Below: the risks specific to these sites, how trailers and live monitoring address them, connectivity for site trailers, how deployment works, what drives coverage and cost, and why a local provider helps.

Data center and chip fab site security at a glance

Large mission-critical builds need coverage that scales with the site: trailers or single-pole units at gates and perimeters, monitoring that can act while something is happening, and connectivity that works before permanent service is available.

Site needWhat Core Solutions providesWhere to learn more
Perimeter, gate, and laydown yard coverageSolar surveillance trailers, job box units, and single-pole unitsSurveillance
Someone watching after hours24/7 human-verified monitoring, live voice intervention, escalationSurveillance
Gate traffic and site activity recordsLicense plate recognition, people and vehicle detection, recorded footageServices
Weak cell signal in and around large structuresCellular amplificationCellular Amplification
Internet for site trailers and remote work areasTemporary business internet and wide-area Wi-FiWiFi Connectivity
PricingTrailer rentals starting at a low monthly rateContact us for a quote

Coverage is configured per site. Your quote depends on your site. Request a site assessment or call 210-460-0091. Tell us your site location, size, phasing, and timeline, and we’ll recommend a setup and price it.

Why data center and chip fab sites are different

A data center or chip fab job site is not a typical commercial build. The risks are bigger, and the site keeps changing as phases open and close.

Copper, cable, and switchgear theft

These projects bring large volumes of copper wire, cable, and electrical gear onto site. Copper is easy to cut, easy to carry, and easy to sell for scrap, and electrical equipment staged before install is a target too.

High-value equipment and materials

Electrical gear, tools, and heavy equipment sit in laydown yards and staging areas, often overnight and over weekends.

Large perimeters

Campus-scale sites can span long fence lines with multiple gates, blind corners, and scattered stockpiles, more than a single guard can watch.

Phased construction

Work areas, gates, and laydown yards move as the project progresses. Coverage has to move with them.

Many trades and heavy gate traffic

Dozens of subcontractors, deliveries, and crews come and go. Project and safety teams need a record of who and what went through the gates.

Weak cell signal inside large structures

Big buildings, distance from towers, and site size can all weaken cellular coverage, making it harder for crews and supervisors to communicate.

No permanent power or internet early on

Site work, foundations, and shell phases happen well before permanent utilities and networks are in place.

Questions to ask any provider

Before you pick a security vendor for a large build, get clear answers to these:

  • Is monitoring human or automated? Does a person verify alerts, or does software just send a notification?
  • Can the operator intervene live, with a voice warning, while it’s happening?
  • Who gets escalated to, and how is that response plan agreed with my site team?
  • Can coverage move and scale as phases, gates, and laydown yards change?
  • Do the units need site power or Wi-Fi?
  • Can the same provider handle cell signal and internet for my site trailers?
  • Who do I call when something needs attention, and will I reach a decision-maker?

How surveillance trailers and live monitoring protect these sites

Recorded footage documents a loss after it has happened. Footage of a thief leaving with your copper is evidence, not prevention. Core Solutions combines AI detection with live human verification and intervention so activity can be handled while it is still unfolding.

Our response process runs Detect > Verify > Intervene > Escalate > Document:

DetectConfigured AI analytics identify people, vehicles, perimeter breaches, and license plates in the monitored area.
VerifyA trained monitoring professional reviews the event to confirm whether it needs action, not an early crew member.
InterveneThe operator can issue a live voice warning through the deployed system.
EscalateVerified threats are reported to your approved site contact or the relevant authorities, based on the agreed response plan.
DocumentIncident details and recorded footage stay available for review.

Verify, intervene, and escalate come with the 24/7 monitoring add-on. See how our monitoring works.

Placing coverage on a large, phased site

Trailers are mobile and solar-powered, so they can go where the risk is today and move when the site changes. Common placements include main and secondary gates, laydown yards and material staging areas, electrical and equipment storage, and long perimeter lines. For tighter spots, a compact job box unit or a single-pole unit for gates, access points, and perimeters may fit better. See deployment options.

Support for safety teams

The same AI analytics can be configured for safety events, not just security: PPE compliance monitoring, slips and falls detection, heat event detection, and restricted-area activity. Authorized users can view live and recorded footage remotely from their devices.

Keeping crews and site trailers connected

Data center and fab sites often need connectivity long before permanent service is available. Core Solutions can add cellular amplification for weak-signal areas and temporary business internet and wide-area Wi-Fi for site trailers and field offices, all through the same team as your surveillance.

Data center and chip fab construction security FAQ

How do you secure a data center construction site in Texas?

Use solar surveillance trailers with AI detection and 24/7 human-verified monitoring at gates, laydown yards, and perimeter lines, so an operator can warn off intruders and escalate while it's happening. Add cellular amplification and temporary internet for crews and site trailers. Core Solutions provides all of this from San Antonio.

Does Core Solutions work on chip fab and semiconductor construction sites?

Core Solutions provides surveillance trailers, 24/7 monitoring, cellular amplification, and temporary connectivity for large construction sites across Texas, and data center construction is one of the industries it supports. The same equipment and monitoring can be configured for semiconductor and chip fab construction sites. Contact us to discuss your site's requirements.

How do surveillance trailers stop copper and cable theft?

AI detects a person or vehicle after hours, a trained operator verifies it on live video, issues a live voice warning, and escalates to your site contacts or police if the person doesn't leave. Recording-only cameras just document the loss; live monitoring is built to act while it's happening.

Do the trailers need power or internet on site?

No. Core Solutions trailers are solar-powered, so there's no trenching, temporary power, or fuel. An internet connection is included in the base price, so your site doesn't need Wi-Fi. They work on raw sites well before permanent utilities are in.

Can coverage move as the project phases change?

Yes. Trailers are mobile, and coverage can be adjusted or expanded as gates, laydown yards, and work areas move. Core Solutions also offers job box and single-pole units for tighter spots, gates, and perimeters. Rentals are month-to-month, so coverage continues if the schedule slips.

Can you track gate traffic on a busy site?

Yes. AI analytics can be configured for people and vehicle detection and license plate recognition, and authorized users can view live and recorded footage remotely. Recorded footage and incident details remain available for review.

Can you fix weak cell signal inside a large building under construction?

Often, yes. Cellular amplification captures available cellular signal and distributes improved coverage to weak-signal areas, including areas with weak indoor coverage. Site conditions and existing signal strength are evaluated first to determine the right solution.

Can you provide internet for our site trailers?

Yes. Core Solutions provides temporary business internet and wide-area Wi-Fi for site trailers, field offices, and remote work areas. We can extend your existing site Wi-Fi, set up standalone Wi-Fi, or provide large-area coverage before permanent service is available.

How fast can you deploy?

Core Solutions trailers are typically deployed within 24-36 hours of approval, and sometimes the same day. We assess your site, configure and price the setup, deploy once you approve, then monitor and support it for the length of the rental.

How much does data center construction site security cost?

Trailer rentals start at a low monthly rate and include AI identification, live video with internet, maintenance, and 15 days of footage storage to start. 24/7 human monitoring is quoted per site. Total cost depends on perimeter size, gates, phasing, risk, and connectivity needs.

Can safety teams use the system too?

Yes. Analytics can be configured for PPE compliance monitoring, slips and falls detection, heat event detection, and restricted-area activity, in addition to security events.

Get a site assessment

Tell us your site location, size, phasing, and timeline, and we’ll recommend a setup and price it. Trailers typically deploy within 24-36 hours of approval, and sometimes the same day.

Get a Custom QuoteCall Us Direct

Core Solutions, San Antonio, Texas. Texas License B30940801.